Freezer room design and installation

Freezer room design and installation in Sydney.

Walk-in freezer rooms for kitchens, food producers, clubs and distributors across Sydney and NSW, designed and installed by licensed refrigeration technicians for reliable storage at −18°C and below.

  • Floor, panel and door built for sub-zero
  • Refrigeration sized for Sydney summers
  • Commissioned, tested and documented
−18°CTypical frozen storage target
1987In the refrigeration trade
ARCLicensed refrigerant handling AU07173
HandoverCommissioning report and as-built details
Why freezer rooms are different

Sub-zero rooms punish shortcuts

A freezer room that is not built for sub-zero will ice up, heave its floor, freeze its door shut and burn power trying to keep up.

Floors that do not heave

Insulated floors with the right vapour barrier and, where needed, heating under the slab, so ground moisture does not freeze and lift the floor.

Doors that seal and open

Heated door frames, strong closers and the right door type for your traffic, so the door seals every time and never freezes shut.

Defrost that works

Evaporators, defrost and drain lines designed for sub-zero, so coils stay clear and water does not turn into an ice sheet.

Our process

From site measure to frozen storage

  1. Site visit and brief. What you store, how much, how often product comes in, and where the plant can go.
  2. Design and written quote. Room size, panel thickness, floor, door, refrigeration capacity and power requirements in one fixed quote.
  3. Approvals and coordination. We work with your builder, electrician and landlord, and advise on any approvals your project needs.
  4. Build and install. Floor, panels, heated door, refrigeration, pipework and controls installed by licensed technicians.
  5. Commission and hand over. Staged pull-down, temperatures verified and recorded, and a handover pack with warranty details.
What we build

Options for every site

  • Kitchen and restaurant walk-in freezers
  • Bakery and ice-cream freezer rooms
  • Meat, seafood and food production freezers
  • Combination coolroom and freezer room builds
  • Replacement refrigeration for existing freezer rooms
  • Conversions from R404A to lower-impact refrigerants

Existing freezer room icing up or running constantly? It is often the door, defrost or an undersized system, not the whole room. We will tell you which.

Freezer room condensing unit installed by BM Refrigeration
After handover

Protect your frozen stock

Planned maintenance

Coils cleaned, defrost tested and door heaters checked on a schedule that suits your site.

Planned maintenance →

Frigbot monitoring

A text the moment the freezer starts to warm, plus automatic temperature records.

How Frigbot works →

24/7 breakdown line

Freezer failures go straight to the on-call technician. Call 1300 669 353.

Questions

Common questions about freezer rooms

How much does a freezer room cost?

It depends on size, floor, panel, door and refrigeration. After a site visit you get a fixed written quote with every item listed.

Can a coolroom be converted into a freezer room?

Sometimes, but usually not without changes. Freezer rooms need thicker panels, an insulated floor and a heated door. We will assess what you have and tell you honestly.

Why is my freezer room icing up?

The most common causes are door seals, door heaters, defrost faults and blocked drains. A service visit will find the cause.

Which refrigerant do you use?

We install lower-impact refrigerants such as R448A, R449A or natural options where suitable, in line with Australia’s HFC phase-down.

Planning a new freezer room?

Request a quote and we will arrange a site visit, or call 1300 669 353 to talk it through.